Mikrotik L2tp Server Setup Full __full__ Jun 2026

/ip ipsec peer add name=l2tp-peers \ address=0.0.0.0/0 \ port=500 \ auth-method=pre-shared-key \ secret=YourSharedSecretKey123 \ generate-policy=port-strict \ exchange-mode=main-l2tp \ send-initial-contact=yes

If you only want to listen on your public interface (e.g., ether1 ): mikrotik l2tp server setup full

Create a range of IP addresses that will be assigned to VPN clients upon connection. Navigate to Add a new pool (e.g., ) and define the range, such as 192.168.89.10-192.168.89.50 MikroTik community forum 2. Configure the PPP Profile The profile defines the behavior of the connection. www.cloudhosting.lv PPP > Profiles and add a new one. Local Address: /ip ipsec peer add name=l2tp-peers \ address=0

For L2TP-over-IPsec with PSK, RouterOS handles many defaults. If you need explicit peer changes (e.g., NAT traversal), add: We've covered the prerequisites

In this article, we've provided a comprehensive guide on how to set up a Mikrotik L2TP server. We've covered the prerequisites, configuration steps, and testing procedures. By following these steps, you should be able to establish a secure and reliable L2TP connection to your Mikrotik router.