Xinje Plc Usb Driver Install 'link' Jun 2026

A: Firmware mismatch. Update the older PLC’s firmware via the XINJE update tool (requires serial connection first).

A: Yes, but the PLC will prioritize the last active connection. Disconnect the USB cable if using a serial HMI to avoid bus contention. xinje plc usb driver install

After the driver is "live," you must point your programming software to the right gate: (for XC series) or XINJE Config Communication Settings Serial Port Settings Select the that matched the number you saw in Device Manager. "Test Communication" to confirm the link is active. Troubleshooting Tips Driver Signature Error: A: Firmware mismatch

The USB driver is necessary to connect Xinje PLCs (via the programming port) to a PC running Xinje’s programming software (XCPPro, AutoShop, etc.). When it works, it’s fine. But the installation process is a known pain point for many users. Disconnect the USB cable if using a serial