| Signal | Typical header pin | Function | |---|---:|---| | PWR_SW | PWR_SW / adjacent GND | Momentary power-on switch | | PWR_LED | PWR_LED+ / PWR_LED- | Power status LED (single or bi-color) | | HDD_LED | HDD_LED+ / HDD_LED- | Hard drive activity LED | | RESET | RESET / GND | Reset switch (if present) | | SPEAKER | SPEAKER+ / SPEAKER- | Internal piezo speaker / beeper |
According to user documentation and community verification on Acer Community , the wiring for the IPISB-VR Rev 1.01 follows this standard: Pin (Positive +) Pin (Negative -) Indicates drive activity Power LED Indicates system is on Reset Switch Polarity typically doesn't matter Power Switch Most critical connection to boot LAN LED Often unused in standard cases Practical Connection Tips
The front panel header (often labeled as F_PANEL or JFP1 ) is responsible for connecting your case's power button, reset switch, and status LEDs. On the IPISB-VR Rev 1.01
If you don’t want to cut wires, you can buy or build a conversion cable.