Sc569-00 Ricoh ((install))

Poor connection or dirty sensor between the toner unit and the mainboard.

Pull the fuser unit out (be careful, it may be hot) and inspect the rear connectors. Ensure no pins are bent and that the unit "clicks" firmly into place when re-inserted. 4. Reset the SC Code (Service Mode) sc569-00 ricoh

Ensure the fuser unit is and the connectors are clean. Poor connection or dirty sensor between the toner

Non-OEM toner contains low-grade waxes that produce excess dust, fouling the thermistor rapidly. Also, damp paper releases steam that condenses residue on sensors. fouling the thermistor rapidly. Also