Iwata 2crh Bundy Clock Manual Page

As he turned the last screw, the ribbon mechanism snapped into place with a satisfying 3. The Final Punch

By leveraging these resources, users can ensure optimal performance, resolve common issues, and extend the lifespan of their Iwata 2CRH Bundy clock. iwata 2crh bundy clock manual

Operates on DC13V 1A; consumes 2W in standby and 10W during active use. As he turned the last screw, the ribbon

Note: The clock does not auto-adjust for months or leap years. Adjust manually on the 1st of each month. Note: The clock does not auto-adjust for months

| Symptom | Likely Cause | Solution | |---------|--------------|----------| | Clock does not move | Dead mains, blown fuse, jammed gears | Check power, replace fuse (slow-blow), oil movement | | Prints faint / no print | Worn ribbon, dirty print wheels | Replace ribbon, clean type with isopropyl alcohol | | Always prints red | Color-change cam stuck, spring broken | Open movement, check cam follower near 12 o’clock wheel | | Prints wrong date | Manual date knob turned, or date wheel jam | Advance date to correct by turning only | | Card jams | Bent card guide, foreign object in slot | Remove debris, gently realign guide with pliers | | Does not print when card inserted | Micro-switch disconnected, solenoid dead | Check switch continuity, listen for solenoid click |

: Set the specific time (e.g., 12:00 AM) when the clock should advance the date on the time card.