clamp to a heavy-gauge metal part of the vehicle frame or engine block away from the battery. Plug in the Charger
MotoMaster Battery Charger 11-1567-8: The Ultimate User Guide and Manual motomasterbatterycharger111567manual full
| Symptom | Possible Cause | Solution | | :--- | :--- | :--- | | | Poor connection | Clean battery posts; ensure clamps are biting into metal. | | | Battery fully charged | Battery may already be full. | | | Blown fuse/Internal Breaker | Check for internal circuit breaker (reset button) if equipped, or check wall outlet. | | Needle goes to max immediately | Internal short in battery | Stop charging immediately. The battery is defective. | | | Reverse polarity | Unplug immediately. Check Red=Positive, Black=Negative. | | Charger hums loudly | Heavy load | This is normal at the 50 Amp start setting. | | Cables get hot | Too high amperage | Switch to lower rate (2 Amp) for smaller batteries. | clamp to a heavy-gauge metal part of the